UIMtp KNX USB Interface
The KNX USB interface UIMtp establishes a data connection between PC (e.g. ETS) and KNX bus.
- Communication between the UIMtp and the devices connected to the bus is handled via the flexible common EMI protocol.
- The UIMtp ensures easy software handling also under operating systems that the FALCON driver doesn´t support (e.g. Linux).
- For specific diagnostic applications like EITT the UIMtp supports the "Raw Frame" operating mode.
- Access to every bus device of the KNX bus system for: commissioning, addressing, setting parameters, visualization, protocolling, diagnostic operation
- USB 2.0 interface device with Type B connector
- works in KNX secure environment
- APDU length 220 bytes
- firmware update via USB
- Powered by USB
- DIN rail housing 2 SU
- KNX-certified
- CE-compliant
- ETS5 or higher
Download
Apricum KNX uređaji - dostupni od sada!
MECps640 - Line-/Area Coupler with integrated 640mA KNX power supply
IPS640 - KNX Power Supply with intelligent diagnostic function and auxillary output
KPS640 - 640mA KNX Power Supply with auxillary output
MECip - KNX IP Router secure with routing and tunneling interface
MECip - KNX IP Router with routing and tunneling interface
MECrf - KNX RF media coupler for RF ready S-mode
MECtp - KNX Line/Area Coupler secure
MECtp - KNX Line/Area Coupler
MIO12 - 12 fold switching actuator with 12 inputs
TAI4 - 4 fold push button interface
TIO4-Sec - secure 4 fold push button interface with status outputs
UIMip -KNX IP Interface with 4 tunneling channels
UIMip -KNX IP Interface secure with 4 tunneling channels
UIMrf - KNX USB Interface for RF
UIMtp - KNX USB Interface for TP
Dostupno
Kupite KNX uređaje ovdje
Kupnja putem Apricuma
>> KNX uređaje zatražite ovdje
Kupnja putem veleprodaje
>> KNX uređaji: Izvori nabave preko partnera
