Universal Switch and Push Button Interface for KNX

Interface that enhances Classical Push Buttons and Switches to Bus Devices

The TAI-KNX 4 interface device enables sensing up to four technical binary signals. Perfectly fit for the usage of classical conventional switches or push buttons with KNX. It finds room behind a switch in a combined wall and joint box (60 mm diameter, 60 mm deep). It is designed for potential free contacts. These floating contacts are connected with four 28 cm long core pairs. The contact scanning voltage is provided by the push button interface. The inputs may not be connected to 230V!

Available functions:

  • Sun protection
  • One-Button Shutter
  • Two-Button or One-Button Dimming
  • Switch (short/long)
  • Send Value: Percent, Angle, Temperature, Forced, 8-bit, 16-bit
  • Counter Reset
  • Blinds
  • Counter Threshold
  • Bit Scene
  • Scene
  • Counter for pulses
  • Interlock