KNX Proizvodi
Naš trenutni portfelj Izbor proizvoda...
KNX automatizacija zgrada - proizvedena za KNX profesionalce
Proizvodnja KNX uređaja izravno je povezana sa sjedištem u Splitu. Ovdje u Hrvatskoj proizvodimo kompletne proizvodne linije, kao što su izvori napajanja, binarni ulazi, relejni aktuatori, linijske spojnice, IP spojnice i mnogi drugi proizvodi koji našim kupcima omogućuju povezivanje sa KNX busom. Inteligentne funkcije naših proizvoda nude kupcima posebnu dodanu vrijednost.
S našim proizvodima nudimo vama i drugim KNX Professionals izvrsnu alternativu drugim poznatim brandovima pri planiranju i provedbi vaših projekata. Profitabilnost je jedan od naših glavnih argumenata u komercijalnim objektima i funkcionalnim zgradama. Uz pomoć naših prodajnih partnera u mogućnosti smo sve projektne upite optimalno odgovoriti. Samo nas izravno pitajte.
Touch Display
Touch Display for standard 55mm switch range
Touch Sensor
Touch sensor for standard 55mm switch range
Push Button
Single or double rocker for standard 55mm switch range
Motion Detector
Ultra flat KNX motion detector for standard 55mm switch range
Presence Detector
Ultra flat KNX presence detector for ceiling installation
IPS640
The compact KNX power supply IPS640 features an choked and a unchoked output. For diagnostic purposes, bus voltage, output current, device temperature and several times of operation are monitored.
KPS640
KPS640 - 640mA KNX Power Supply with auxillary output
MECps640
The new compact MECps640 merges the functionalities of two system devices.
Beside the line coupler function, it also powers the KNX TP subline.
MECtp
MECtp connects KNX segments (lines, areas). It provides various routing filters for group and individual telegrams.
MECtp-Sec
MECtp connects KNX segments (lines, areas). It provides various routing filters for group and individual telegrams.
The secure version MECtp-Sec supports encrypted configuration using KNX Data Secure.
MECip
MECip connects a KNX TP line to a KNXnet/IP Backbone. Via IP Tunnelling，ETS can communicate with the KNX bus.
MECip-Sec
MECip-Sec - KNX IP Router secure with routing and tunneling interface
UIMip
UIMip connects the PC (e.g. ETS) to the KNX bus for commissioning and monitoring over IP.
UIMip-Sec
UIMip connects the PC (e.g. ETS) to the KNX bus for commissioning and monitoring over IP.
The secure version UIMip-Sec protects the tunnelling protocol by using KNX IP secure.
UIMrf
USB Interface Device for KNX RF Ready S-Mode (UIMrf) enables easy access to KNX RF S-mode bus devices via RF.
MECrf
Line coupler MECrf connects a KNX TP-line to a KNX-RF-subline.
TAI4
The TAI4 Push Button Interface is a device that enables the usage of conventional switches，push buttons or for sensing technical binary signals.
TIO4-Sec
The new 4-fold push-button interface TIO4-Sec is the further development of the well-known TAI4. TIO4-Sec now also supports KNX Data Secure. The channels of TIO4-Sec can be used as outputs to reflect LEDs' status .
MIO12
The MIO12 is a device with 12-channel output and 12-channel binary input. It is to be mounted in the distribution board. It can control 12 independent loads with max. 16A per channel.
UIMtp
UIMtp - KNX USB Interface for TP
Dostupno
Kupite KNX uređaje ovdje
Kupnja putem Apricuma
>> KNX uređaje zatražite ovdje
Kupnja putem veleprodaje
>> KNX uređaji: Izvori nabave preko partnera
